Parr-instrument Primary Temp Meter Manual de usuario descargar pdf (Pagina 3)

- 3 -

PTM Installation in a 4848

Final Steps:

Close the controller and replace the two screws on the top plate. Plug the 4848 Controller back in

and turn it on. The display should show room temperature with the thermocouple connected. It is

useful to check that the settings on the display are set correctly. Check these against the Factory

Default Settings.

1 2 3 4 5 6 7 8

Sin comentarios

Parr-instrument Primary Temp Meter Manual de usuario Pagina 3