Parr-instrument 6200 Manual de usuario descargar pdf (Pagina 63)

Communications Interfaces

6200

www.parrinst.com

Ethernet Interface

Calorimeter test data can be transferred to an Eth-

ernet network connected computer using the FTP

File Transfer Protocol. First, you must know the IP

address of the network-connected calorimeter. The

network DHCP (Dynamic Host Conﬁguration Proto-

col) server provides this address shortly after the

calorimeter is turned on or a static IP address can be

assigned. The address can be seen on the “software

and hardware info” page, under “program informa-

tion and control”. See the example screenshot.

Users who don’t have a network infrastructure can

create a simple network by connecting a router with

DHCP server capability to the calorimeter using

an ordinary CAT 5 network cable. The calorimeter

should be connected to LAN side of the router. The

PC in turn is also connected to the LAN side of the

router using a similar CAT 5 cable. A D-Link 614+

router is recommended for this purpose. For this

router, operated without a WAN connection, the pri-

mary DNS address of the router (WAN setup) must

be set to the IP address of the router found on the

LAN setup page. Other routers behave differently

in the absence of a WAN connection. Providing an

active upstream connection to the WAN port of most

routers generally minimizes the use of any obscure

setup conﬁgurations.

An FTP enabled web browser can be used to access

stored test data. The URL is of the following form.

ftp://root:rootroot@192.168.0.125/../ash/data/

The datalog ﬁle can be accessed at:

ftp://root:rootroot@192.168.0.125/../ash/log/datalog.csv

In this case, 192.168.0.125 is the IP address of the

calorimeter.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 87 88

Sin comentarios

Parr-instrument 6200 Manual de usuario Pagina 63